Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5
The 5R7-582 provides Bi-directional H-Bridge control for both heating and cooling with seamless transition. User friendly PC software allows for configuration in any combination of PID, On-Off, differential temperature or manual output control. The 5R7-582 temperature controller can be used to take the input from a single sensor and control multiple sets of TE modules through the client controllers (5R7-583). Based on the temperature reading, the 5R7-582 temperature controller will send out the same power level and current direction to all of the clients. By setting up the thermal system this way, much more power is available to control your thermoelectric modules. Each client is a full pulse width modulated H-bridge with 28VDC/25A of available power.
Specifications:
Input Voltage: 9 to 36 VDC
Load Current: 0.1 to 28 A
Temperature Resolution: 0.01°C
PID Functions:
Bandwidth: 1 to 20°C
Integral: 0 to 5 repeats per minute
Derivative: 0 to 5
PWM base frequency: 2.7 Khz
Ambient Temperature Range: of 0 to 70°C
Power Dissipation: 18 W
Output Power Resolution: 0.19%
Dimensions: 1.75” H x 6” W x 3.63” D
Customer Drawing: CDR-00333
Features:
Full H-Bridge Control
PC Programmable
PID or On/Off Control Function
PC Configurable Alarm Circuit
RS232 and (2) RS485 Communication Ports
Set Temperature range of –40 to 200°C
RoHS Compliant
Accessories:
Additional Options:
Power Supplies:
Sensors: